Potters-village

Decided to take swing at creating a village with farm etc. in the middle of the clay mountains and this is the first take. It is complete with 2 wells, a farm, 4 decorative water fall areas at the wells, a tower. a sublevel for two areas. stair well leading down(you'll need to decide where it goes to) The entire village is walled (with a small wall and slab design) in for safety. the wells are designed to be deeper as they are on my personal world (I cut them shorter so this schematic wouldn't be too huge). Also you will find the water ways are interconnected to the farm and one of the wells I thought it was important at the time that they had water supplies(turns out it is more for looks then anything else) All work was done by hand no use of worldedit etc was used, also all work was done originally in survival before changing to creative to redo the lighting. This build took only a week or so and has seen several revisions before I was happy with this a simple version with no redstone etc. This build was originally completed approximately June of 2016 about 4 weeks after I got Minecraft and began playing so it is not I'm sure the best but hey it was a start.

As this is my first attempt at schematic work, I value your input and hope I've done well. My measurements are as far as I can tell accurate but they could be off a little bit. Lastly the estimated blocks for this schematic are including air, I suggest using paste -air (or -a if using worldedit)

And on a final note please give me your thoughts, feel free to use this if you wish to just give me credit for my work....

Thanks EchoCallingEarth

PS I've done a bunch since then and will be loading those here as well over time.